Naviter Oudie 4, Manual, Page: 97 / 158

Settings 92
© 2003 - 2016 ... Naviter d.o.o.
8 Settings
The Settings dialog has an array of Pages where all of the Oudie 4 preferences can be setup. Note that
some settings like Map and Navboxes are separate for Map 1 and Map 2 views while others like Units,
Commands etc. are unique through the whole application.
Available pages are
.
Map where display of the vector map is setup
. Airspace where display of airspace and airspace warning is setup
. Waypoints page controls the way waypoints are displayed
. Track &Target page sets up the trace, vario colors of the displayed trace
. OLC & FAI area page (short for Optimization) lets you setup how the optimizations are calculated
. Task page sets up the observation zones and other task options
. Navboxes page lets you choose which navboxes to display and control their appearance
. Symbols page allows you to choose from symbols for the map display
. Warnings page sets up airspace and altitude warnings
. Thermal page sets up the Thermal assistant
. Polar page has all the controls to choose the polar for your glider
. Units by your preference
. Fonts page changes the appearance of the text on the screen
. Input page lets you select between GPS, Simulator and File replay mode
. Commands page reassigns tasks to all buttons of your PDA and SeeYou Mobile
. Menu page lets you control the content of the main Menu
. Files page has shortcuts to the terrain, waypoint and airspace files
. IGC Logging page sets up the header for the IGC file
. User interface is short for User Interface
. Miscellaneous page has all the rest
. Hardware page controls communication to GPS with proprietary sentences
8.1 Map
This dialog allows you to setup the appearance of the map in Map view . Oudie 4 uses CIT maps for
rendering the terrain. It is the same map as in the desktop version of SeeYou.
Show map check box will enable the display of the Vector map if checked.
92
95
96
97
98
100
100
108
109
110
112
113
114
115
117
117
118
120
121
122
123
49