Naviter Oudie 4, Manual

Page: 23 / 158

How to 18
© 2003 - 2016 ... Naviter d.o.o.
3. Next time you start Oudie 4 you will have two (or
more) profiles to choose from. You have 10 seconds to
select a profile. If you do nothing, the profile you used
last is loaded.
4. After you have loaded the profile for the first time
you will want to set it up according to your preferences.
Here is a handful of settings you will probably want to
change before use:
Links to Terrain, Airspace and Waypoint files
Pilot name and Glider type settings
Navboxes for Map1
Navboxes for Map2
Note: Switch Profile is not featured in Oudie 4 Basic.
See also:
Getting Started
3.2 Set takeoff altitude
Setting the takeoff altitude correctly could be the difference between a successful and a frustrating end
of the flight.
The altitude in the Oudie 4 is recorded at the standard pressure of 1013.25 hPa. In order to know you
current altitude above mean sea level and your current flight level altitude the altitudes need to be
corrected to correspond with the real world.
There are several ways how the Oudie 4 can correct the takeoff altitude. It will typically assume that the
pressure recorded by the pressure sensor is relative to the standard atmosphere pressure of 1013.25
hPa (but it is even possible to correct for that, see below). It is quite possible to correct the altitudes to
QNH automatically with the data which is already available on the Oudie 4. If you get the information
from an external source (such as the ATC tower or the competition task sheet) then it is possible to enter
the values manually as well.
118
120
100
100
5