SECTION 4 – ENGINE OPERATION
Preoperation Checklist
GOVERNMENT
REGULATION:
Engine
fluids
(oil, fuel, and coolant) may be a hazard to human
health and the environment.
Handle all fluids and
other contaminated materials (e.g.
filters, rags) in
accordance with applicable regulations.
Recycle
or dispose of engine fluids,
filters,
and other
contaminated
materials
according
to
applicable
regulations.
WARNING
To prevent personal injury or death, provide
ventilation when operating an engine in a closed
area. Inhalation of exhaust gas can be fatal.
This engine has been given predelivery and delivery service by
your International dealer and is ready for operation. The operator
should fully understand the use and function of all controls and
instruments.
1.
Check cooling system level.
Figure 25
Oil level gauge (typical)
CAUTION
To prevent engine damage, do not overfill with oil.
2.
Check for correct oil level.
3.
If oil level is below operating range, fill with recommended
oil for operating climate. The ADD mark indicates 2.8 liters
(3 quarts US) of oil should be added. See Engine Oil Quality
and Service Categories (page 31).
4.
Inspect for coolant, fuel or oil leaks.
5.
Inspect air cleaner and piping for tightness and correct
installation of filter element.
6.
Check for loose or hanging electrical connections.
7.
Check belt condition and alignment.
8.
Fill the tank with recommended fuel. See Acceptable Fuel
Blends (page 30).
9.
Inspect exhaust system for obstruction or damage.
10. Drain water from fuel system.
Page 45
Summary of Contents for MaxxForce DT
Page 8: ......
Page 10: ...FOREWORD Page 2...
Page 14: ...SAFETY INFORMATION Page 6...
