Operator Interface
– graphically by white marker
Numerical indicator and markers are displayed in following modes only:
– DP Mode (Auto Heading, LS Track and Target),
– AP Mode (Auto Heading /HS Track).
Off-Heading Limit
The range of the allowable heading deviation from the heading setpoint is displayed with yellow line
on the scale.
A range value is set by operator in
HGD
page of the
Param
window (see Section 5.9, page 85).
Off-Heading Limit Excess
Off-Heading Limit indicator becomes red-colored in case a value of heading error exceeds a
value of Off-Heading Limit.
The indication disappears as the deviation is less than a half of Off-Heading Limit.
This indication is provided only in Auto Heading mode.
NOTE!
The indication is provided if a heading setpoint has been achieved.
Heading Error
Heading error indicator displays the deviation from the heading setpoint. ‘S’ means starboard, ‘P’ -
portside.
Yaw Rate
Yaw rate indicator displays a value of yaw rate and its direction. ‘S’ means starboard, ‘P’ - portside.
5.4.2
Vessel position displaying
Position Error, Auto Position Mode
Indicators display the deviation of a vessel from Set Position.
The left Position Error indicator displays the deviation in the surge/north axis.
The right Position Error indicator displays the deviation in the sway/east axis.
Data is displayed depending on a Map view selected in View page of Param window(5.9, page 85):
–
View: REL
the deviation is displayed in vessel coordinates.
For left indicator: ‘F’ means forward, ‘A’ - aft.
For right indicator: ‘P’ means portside, ‘S’ - starboard.
–
View: TRUE
the deviation is displayed in geographical coordinates.
For left indicator: ‘N’ means north, ‘S’ - south.
For right indicator: ‘E’ means east, ‘W’ - west.
The indication of Position limit excess is provided by the system:
In case the vessel exceeds Position limit the Position Error indicators become red-colored. The Position limit is set
by operator in
Pos
page of
Param
window (see Section 5.9, page 85).
NOTE!
This indication appears if the vessel reached Set Position and then ex-
ceeded the Position limit.
Position Error, LS Track Mode
Indicators display the deviation of a vessel from current track leg.
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
72
