Routes transferring and uploading
Appendix E
Routes transferring and uploading
E.1
RTE Messages: Routes
$--RTE,x.x,x.x,a,c--c,c--c, ..... c--c*hh<CR><LF>
where:
x.x
— Total number of messages being transmitted
x.x
— Message Number
a
— Message mode
– c = complete route, all waypoints
– w = working route, the waypoint you just left, the waypoint you’re heading to, then all the rest
c–c
— Waypoint ID (more waypoints follow)
*hh
— Checksum
E.2
WPL Message: Waypoint Location
$--WPL,llll.ll,a,yyyyy.yy,a,c--c*hh<CR><LF>
where:
llll.ll
— Latitude
a
— N or S (North or South)
yyyy.yy
— Longitude
a
— E or W (East or West)
c–c
— Waypoint name
*hh
— Checksum
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
300