NAVIS NavDP 4000. Operation Manual
Figure 10.6: FUNC Panel: AWC function disabled
Figure 10.7: FUNC Panel: AWC function enabled
Figure 10.8: Thrust ability diagram. AWC function is OFF
Figure 10.9: Thrust ability diagram. AWC function is ON
When you tilt the joystick, the corresponding vector force demand
F
demand
is being calculated.
If the AWC function is activated, the vector force demand is calculated as sum of demand, depending on joystick
position, and the force needed to compensate the wind disturbance
F
disturb
. See figure 10.5 for details. You can consider
this as a shift in the joystick axes.
The same can be said about the rotary knob.
If the AWC function is not activated, the total moment demand depends on how much you rotate the knob. If the AWC
function is activated, the total moment demand also includes an AWC component.
See Section 6.1.2, page 102 for details on thrust ability diagram.
175
Doc. 000.JDP-10000-OME, rev.3.3.13/“2102.$–17A-Advanced”
