Navigon 21MAX, User Manual

Page: 70 / 118

Working With Routes
58 NAVIGON 21MAX User’s Guide March 2008
NAVIGON, INC.
3. Enter the starting point. (See the corresponding section of “Selecting Destina-
tions” on page 31.)
4. Tap the Set Starting Point button.
The selected destination appears next to the 0, indicating that it is the Starting
Point of the route.
Changing the starting point
On the R
OUTE
P
LANNING WINDOW
:
1. Tap the Specify Starting Point button.
The S
TARTING
P
OINT
menu opens.
2. Select a different starting point by following the above steps.
Entering route points
Route points are destinations on the route that you want to navigate to.
The flow number for each route point can be found on a button in front of it.
On the R
OUTE
P
LANNING WINDOW
:
1. Tap the Add Route Point field.
The R
OUTE
P
OINT
menu opens.
2. Tap on the button for the desired destination entry type.
3. Enter the route point. (See the corresponding section of “Ways to Search for Des-
tinations” on page 33.)
4. Tap the Add button.
The selected route point is shown next to its flow number.
5. Repeat these steps for each additional destination that you want to add to your
route.
Changing the order of route points
Route points can be deleted from a route. The order of the route points can be varied as
you wish.
On the R
OUTE
P
LANNING WINDOW
:
Tap on the route point that you want to edit.
Note: The starting point (flow number "0") cannot be moved nor deleted.