NavigateWorx NR600 Series, User Manual, Page: 80 / 91

Industrial Cellular VPN Router NR600 Series User Manual
Page 79 / 90
4.8.3 System
This section allows you to review the device system
settings.
System->General
•
Hostname
User-defined router name, which might be use for IPSec local ID identify.
• Enable Performance mode
Check the box to make the router enable Performance mode.
•
User LED Type
Defined the User LED behavior.
• Time Zone
Select the zone where the device is in use.
• Customized Time Zone
Customized the zone where the device is in use.
•
Enable (NTP Client)
Selected Enabled to utilize the NTP client to synchronize the device clock over the network using a
time server (NTP server).
•
Primary NTP Server
Enter the IP address (or host name) of the primary time server.
• Secondary NTP Server
Enter the IP address (or host name) of the secondary time server.
•
Synchronize Modem Time
Synchronize the time from cellular module.
•
Enable NTP Server
Check the box to make the router as a NTP server.