Navig[8]r Navcam-HD, User Manual

Page: 5 / 13

NAVCAM-HD
USER MANUAL
5
image appear upside down, press the “flip” button on the top of the Navcam-HD unit
to flip the image 180 degrees.
Recording
Turn on the NAVCAM-HD. Recording should start automatically. If not press the “OK”
button. When recording, the word “REC” will appear in the LCD and the green LED
will flash. The recorded file is saved onto the Micro SDHC Card. Stop recording by
either pressing the
OK button or turning the car ignition off (stopping power to the
device)
In the event of an incident / accident
– STOP the Recording .
- Due to the “cycle recording” nature of this technology, older recorded files will be overwritten (depending on
the chosen resolution settings and the memory capacity of the Micro SD card). For example a 2GB SD card at
HD resolution will only offer you 20 minutes of record time before the files (2 or 5 or 15min sizes) start to get
overwritten
- Should you wish to KEEP the video footage of an incident from not being overwritten, stop the recording soon
after an incident has occurred. (Either press “OK” or disconnect the power or remove the Micro SD card).
- Alternately use a larger capacity SD card or lower the recording resolution (eg; a 32GB SD card at VGA
resolution will offer you 640 minutes of record time) or otherwise use a second Micro SD card as a backup.