54 Configuring the Remote Controller System
2. Set the recirculation activation time by pressing
the Up or Down button.
or
Then, press the OK button to set the
deactivation time.
Note
The recirculation timer settings are
divided in 30 minute increments.
3. Set the deactivation time by pressing the Up or
Down button.
or
4. Press the OK button to save the timer setting.
Repeat these procedures for Reservation
Schedule Settings #2 and #3.
4. Press the OK button to finish and save the
updated time.
4.8 Setting the Recirculation
Timer
1. Press the Preheat & Timer button to set the
Recirculation timer while setting the clock.
Reservation Schedule #1 is ready to be set.
Note
This feature is available only when
external circulating pumps are
connected and ON.
Summary of Contents for NHW700
Page 83: ...Memo...
