background image

Safety Information        3

WARNING

If you do not follow these instructions exactly, a fire or explosion 

may result causing property damage, personal injury or loss of 

life.

A.  This appliance does not have a pilot. It is equipped with an 

ignition device which automatically lights the burner. Do 

not try to light the burner by hand.

B.  BEFORE OPERATING smell all around the appliance area for 

gas. Be sure to smell next to the floor because some gas is 

heavier than air and will settle on the floor.
WHAT TO DO IF YOU SMELL GAS

 

Do not try to light any appliance.

 

Do not touch any electric switch; do not use any phone 

in your building.

 

Immediately call your gas supplier from a neighbor’s 

phone. Follow the gas supplier’s instructions.

 

If you cannot reach your gas supplier, call the fire 

department.

 

Do not return to your home until authorized by your 

gas supplier or the fire department.

C.  Do not use this appliance if any part has been under water. 

Immediately call a qualified service technician to inspect 

the appliance and to replace any part of the control system 

and any gas control which has been under water.

The following safety symbols are used in this manual. Read and 

follow all safety instructions in this manual precisely to avoid 

unsafe operating conditions, fire, explosion, property damage, 

personal injury, or death. Keep this manual for future reference.

DANGER

Indicates an imminently hazardous situation which, if not 

avoided, could result in severe injury or death.

WARNING

Indicates a potentially hazardous situation which, if not 

avoided, may result in injury or death.

CAUTION

Indicates a potentially hazardous situation that, if not avoided, 

could result in property damage.

1.    Safety Information

Summary of Contents for NFC Series



























Reviews: