Navico NSPL-500, User Manual

Page: 7 / 24

| 5
Notices | NSPL-500 User Manual
antenna is mounted at least 1.5 m away from the NSPL-500 and is
connected to the NSPL-500 before power is applied.
The system has a Maximum Permissible Exposure (MPE) radius of
0.6 m. This has been determined assuming the maximum power of
the AIS transceiver and using antennas with a maximum gain of 3 db.
The antenna should be mounted 3.5 m above the deck in order to
meet RF exposure requirements. Higher gain antennas will require a
greater MPE radius. Do not operate the unit when anyone is within
the MPE radius of the antenna (unless they are shielded from the an-
tenna field by a grounded metallic barrier). The antenna should not
be co-located or operated in conjunction with any other transmit-
ting antenna. The required antenna impedance is 50 ohms.
Warranty
This product is supplied with standard warranty as defined in the
accompanying warranty information.
Warning:
Any attempt to tamper with or damage the
product will invalidate the warranty.
Disposal of this product and packaging
Please dispose of the NSPL-500 in accordance with the European
WEEE Directive or with the applicable local regulations for disposal
of electrical equipment.
Every effort has been made to ensure the packaging for this product
is recyclable. Please dispose of the packaging in an environmentally
friendly manner.
NSPL-500
NSPL-500