NAVI F-52, Instruction Manual

Page: 157 / 270

Chapter 11 METER SETTING
11.5 Compact Flash Setting
（
F-53, 54, 55
）
144 HORIBA
11.5
Compact Flash Setting
（
F-53, 54, 55
）
This section explains the compact flash operation.
The typical use of the compact flash function is as follows:
●
Memory data can be read into the compact flash card. Reading this data with the
exclusive software produced by HORIBA enables the data to be transferred to a
PC.
●
The personal information can be written into the compact flash card. Inserting the
compact flash into the system and turning on the power reads the personal data
into the system, and starts up the meter.
11.5.1 Cautions for operation
Cautionary items:
●
The compact flash cards used in this meter should be either 8MB or 16MB.
●
A micro drive with hard disk format is not available.
●
Always use the products that HORIBA sells or a HORIBA specified manufac-
turer.
Specified manufacturers: Hagiwara SysCom, Sun Disk
Compact flash format
●
To initialize the compact flash card, use the format function of the meter. Accord-
ing to the capacity, the format is given in either FAT12 or FAT16.
The compact flash cards available in this meter are MS-DOS format for MicroSoft
®
.
11.5.2 Attachment/Removal of compact flash card
●
Attachment
1.
Insert the compact flash card to the
CF card slot so that the HORIBA
logo comes to the top.
●
Removal
1.
In the COMPACT FLASH SETUP
screen, press F2 (REMOVE).
2.
Push the removal lever besides the
CF card slot, and remove the card.