background image

20211004 

Copyright © 2021 Infinite Electronics International, Inc. All Rights Reserved. 

 

OWNER’S

 MANUAL: 600mm Wall-Mount Rack 

 

 

 

Keep this information for further reference. 
 
Thank you for purchasing a NavePoint product. If you have any questions regarding the installation or use of your 
product, please call us at   888.505.1363. 
 
Please examine the product for any damaged parts. If any part is damaged or missing, contact NavePoint for assistance. Do not 
attempt to install or use product if it has been damaged. 
 
During installation, lay product contents on cardboard or other protective surface to avoid any damage. 
Improper installation or use of this product could result in damage to the product, other equipment, or personal injury.  It is 
recommended that installation be performed by a qualified installer. NavePoint cannot be held responsible for damage to 
equipment or personal injury resulting from improper use or installation of product. If product is intended to store/mount 
equipment, please ensure the equipment stored/mounted does not exceed the specified weight capacity. 
 
Limitations of Liability: In no event will Infinite Electronics International, Inc. be liable for any damages, whether direct or indirect, 
special, punitive, incidental or consequential damages (including, but not limited to, lost profits or revenue, loss of use, lost 
business opportunities or loss of goodwill) or for the costs of procuring substitute products, arising out of or in connection with 
the use of the product, whether such liability arises from any claim based upon contract, warranty, tort (including negligence), 
product liability or otherwise, whether or not seller has been advised of the possibility of such loss or  damage. In no event will 

seller’s total cumulative liability, from all causes of action and all theor

ies of liability, exceed the total amounts actually paid to 

seller by customer under the order that gives rise to any liability hereunder. 

THIS MANUAL APPLIES TO THE FOLLOWING SKUs: 00301461, 00301462, 00301463, 00301464 

Summary of Contents for 00301461







Reviews: