10
NA30C
Bluetooth Operation
Before you can use a Bluetooth device, it must be paired and
connected. Make sure that Bluetooth is activated on your
device before you begin the pairing process.
The NA30C broadcasts the pairing signal constantly
when no devices are currently connected. Complete the
pairing sequence from your Bluetooth device. Refer to the
owner's manual for your device for more details.
The device name is "NA30C"
The Bluetooth passcode "0000"
Note:
The NA30C can be in any mode of operation
when pairing is performed.
The NA30C supports A2DP (advanced audio distribution
profile) wireless streaming audio from your Bluetooth mobile
device directly to your head unit. You can also control your
music from the front panel of the head unit using AVRCP
(audio video remote control profile).
• To stream music to your head unit, your mobile device must
support the A2DP and AVRCP Bluetooth profiles. Check the
owner's manual of your mobile device for details.
• Streaming audio must be enabled from your mobile device.
This option will vary depending on the device. Some devices
allow streaming audio to be disabled.
After pairing, connecting and enabling streaming audio
from a compatible mobile device, begin playing music using
the music player on your mobile device. Once the music is
playing, the following functions can be used to control the
music:
• The
ll
button will skip to the next available audio track.
• The
nn
button will skip to the previous audio track.
• The
l
/
ll
button will toggle between play and pause
during playback.
Note:
Some Bluetooth devices may not fully support these
commands.
Preparation
Pairing a New Device
Streaming Audio