Navad Trail 200, Quick Manual Manual

Page: 8 / 27

Mount Installation
To install the NAVAD on the stem or handlebar:
(1) Attach the bracket pad to the bracket holder.
(2) Place the rubber pad under the bike mount and attach the bike mount securely to the
bike stem, using the two cable ties.
(3) Twist clockwise the GPS on top of the bike mount until it snaps into place.
(4) Check the NAVAD is properly installed and firmly attached to your bicycle.
(5) Check screen visibility in the riding position. All installation activity should be done before
riding.
1
.
2
.
3
.