BM
05/09/14
NTV-DOC179
1 |
P a g e
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
Video RCA I/O Harness
NTV-HAR258
3950 NW 120
th
Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760
V2P-II
NTV-KIT493
Overview
The V2P-II is NAV-TV’s Video to Power module. Whenever a video is present on either RCA, the
attached red wire will output 12v (+). This would be helpful in various situations:
Powering on an aftermarket headrest/flip-down monitor when a video source is present
Activating the NAV-TV AVSW to automatically switch to the active video source in a
multi-AV device setup
Automatically displaying a trailer camera instead of the factory rear cam, when a trailer
is physically connected with no external switches required
Kit Contents
V2P Board
NTV-ASY177