BHM
05/05/14
NTV-DOC187
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
3 |
P a g e
of the installation is correct, proceed to step 8 to manually populate the provided
Rear-Trigger Pin
(This includes verifying camera power from an ACC source!).
8.
Perform this step only if
nothing happens on the factory display when the vehicle is
placed into reverse:
a.
Locate the
28-PIN plug
on the back side of the radio and find the factory harness
that connects to it (if applicable, this harness may not be present).
b.
If the plug is present, you’ll likely need to pry the pin-lock free on the back side
of the factory connector (look closely).
c.
Insert the pin
fully
into the connector (or plug) in the position shown below:
d.
Supply a 12v + signal
while in reverse only
(tap at reverse light) to the free end
of this Rear-Trigger Pin. Verify operation by placing vehicle into reverse.
(Pin side)
