JR, BM
09/03/15
NTV-DOC 144
rB5
5 |
P a g e
Agreement
:
End user agrees to use this product in compliance with all State and Federal laws. NAV-TV Corp. would not be held liable for
misuse of its product. If you do not agree, please discontinue use immediately and return product to place of purchase. This product is
intended for off-road use and passenger entertainment only.
4.
Plug the supplied 3-pin to RCA harness into the radio. Plug the other end into the
Yellow RCA labeled “AV OUT” of the AV switcher.
5.
The Front camera signal goes to the RCA labeled “V1” of the switcher.
6.
The Rear camera signal goes to the RCA labeled “V2” of the switcher.
Note - If the vehicle has factory VES installed,
DO NOT
connect audio T-harness.
Factory VES requires a send in modification for video to be viewed on the radio
.
When the optional switcher is being used, do not use the RCAs on the REC
-AV Plug-n-Play
harness.
Multiple video inputs using the optional switcher (AVSW)
When installing rear camera, VES emulation and front camera, an optional switcher is required.
This will allow multiple video inputs to be sourced in.
Switcher
REC-AV Output
Black
Chassis Ground
White/Red (pin 7)
White/Red (pin
12)
White/Blue (pin 8)
White/Blue(pin
11)
Switcher connections
Input Source
Factory AV
External Video source
AV out
3-pin to RCA plug to
Radio
V1
Front Camera
V2
Rear Camera
*Note - The audio inputs/outputs are not used.
