background image

 

2

3B

SAFETY PRECAUTIONS 

 

Thank you for your purchasing our products. Even though we go to great efforts to ensure the 
quality of each product, occasional error, and/or omissions do occur. In any event should you find 
this product to be defective or missing parts please contact us. 

IMPORTANT: Read all instructions and warnings before assembly and operation. 
 

U

Important Voltage Information 

Before plugging the power cord into an electrical outlet, verify that the voltage requirements for your 
area match the voltage of the treadmill that you have received. The power requirements for the 
treadmill include a grounded, dedicated circuit, rated for one of the following figure. See the serial 
number decal for the exact voltage requirements of your treadmill. 

WARNING: Don't attempt to use this unit with a voltage adapter. Don't attempt to use this 
unit with an extension cord.   
 

U

Grounding Instructions 

This treadmill must be grounded. If it should malfunction or break down, grounding provides 
a path of least resistance for electric current to reduce the risk of electric shock.   
This product is equipped with a cord having an equipment-grounding conductor and a grounding 
plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in 
accordance with all local codes and ordinances. 
Please make sure that the treadmill is connected to an outlet having the same configuration as the 
plug. Do not use a ground plug adapter to adapt the power cord to a non-grounded outlet. 
 

 

115V     EURO PLUG  208-220V 

NEMA 5-20  CEE 7/7      NEMA 6-15 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

The power requirements 
for the treadmill include a 
grounded, dedicated 
circuit, rated for one of the 
following: 
115 VAC 5%, 60HZ and 20 
amps; 208/220 VAC, 
60HZ, 15 amps or 230 VAC 
5%, 50HZ and 15amps. 

Summary of Contents for T7000




























Reviews: