Nautilus Hyosung MX7700QT, Service Manual, Page: 33 / 51

Cash and Check In Module
27
REJECT
교체 방법
1. Remove 6 screws with a (+) Driver and Separate BUNDLE Module as shown in Fig.
☞ Refer to Bundle 교체 방법
2. Remove 4 screws with a (+) Driver and take off COVER_TOP as shown in Fig.
3. Remove 4 screws with a (+) Driver and take off ASSY_GEAR_PULLEY as shown in Detail
view “ B ” .
4. Remove 2 screws with a (+) Driver and take off ASSY_BRKT_TENSION_1 as shown
in Detail view “ C ” .
5. Loose 1 screw with a (+) Driver properly on ASSY_BRKT_TENSION_2 as shown in Detail
view “ D ” .
6. Disassemble the cable connected to REJECT Module.
7. Remove 2 screws with a (+) Driver.
8. Separate REJECT Module as shown in Fig.
9. 조립은 분해의 역순으로 진행함.
3
4
REJECT Module
P/N:7305000185
2
1
8
7
“ A ”
“ B ”
“ C ”
REJECT Module 교체 방법
“ D ”
6
5