SW Installation
12
©
Nautilus Hyosung, Inc.
All Rights Reserved.
When an Error Occurs
►
When you try to enter Supervisor Mode or go into
IN SERVICE MODE
from supervisor
menu, the screen below will be displayed if there is any ERROR.
Press
DEVICE INITIALIZE
button, if the error is caused by a device so it can be
cleared by initializing.
Press
OPERATOR FUNCTION
button, if you have to set up any information to clear
the error. And set up the information which is missed.
<Note!>
If the machine goes out of service, he error code will not always appear on the screen.
If you do not see an error code, enter operator function and go to reports. Look in the
error summary for error codes.
