Chapter4. Receipt Printer (SPR60) Operator Manual
4-12
©
Nautilus Hyosung, Inc.
All Rights Reserved.
Clear the jammed paper in the cutter
► When any of the following cases occurs, please remove jammed paper manually.
1. Paper jams between platen roller and cutter holder.
2. Paper accumulates at paper inlet of the cutter in the front of print head.
3. The cutter can’t cut off paper.
► Remove the jammed paper manually in the following steps:
1. Turn off the printer power;
2. Press the spanner slightly with hand as shown in the following figure to open the top cover;
3. Check whether there is wastepaper under the cutter blade and print head. If so, please take it out;
4. When confirming there is no wastepaper, close the top cover;
Caution:
Turn off the power before removing the jammed paper.
