Operator Manual Chapter6. Receipt Printer
© 2016
Nautilus Hyosung Inc.
All Rights Reserved. 6-1
Chapter6. Receipt Printer
Receipt Paper
► Basic specifications of receipt paper are summarized as follows.
Item
Specifications
Note
Paper Type
Inside Printing Thermal Roll
Paper
Paper detects heat.
Paper Width
3.13±0.02inch (79.5±0.5mm)
Paper Exterior
Max. φ210mm ± 2
Paper Inside Diameter
18.0mm
Print Color
Black
Type of Paper Setting
Semi-Auto loading
► Printing specification of the black mark
1. Use black without dark or bright shades.
2. Use the oil ink. (no surface gloss)
3. Permeation ratio: Less than 10%
4. Reflection ratio - PCS 0.9 or higher (Less than Mark GBase PCM II 900nm)
5. Thickness should take precedence over reflection ratio.
6. The slippery gap between the black mark and the rule mark should be less than
0.5mm.
►Paper Handling Precautions
1. Store it away from high temperature and humidity:
If the paper is stored in a place where temperature is above 50
℃
or humidity is
above 90% RH, the coloring capability may deteriorate or the paper surface may
inflate.
2. Refrain from exposing to direct sunlight:
The paper surface can be inflated if you expose it to direct sunlight or leave it under
the fluorescent lamp for a long time.
3. Keep it away from the organic solvents:
Paper color may change if the paper comes in contact with organic solvents or
glues containing organic solvent.
4. Keep it away from plastics:
If the paper comes in contact with materials containing plastics, its coloring
capability may deteriorate or de-coloring of the paper may occur.
5. Store the paper roll separately to prevent damage to the paper.
6. Do not connect the papers with tape.
7. Make sure the paper end is not attached to the paper pipe.
8. Make sure the paper is rolled evenly.
9. Miscellaneous:
If the paper comes in contact with carbon copy paper or if the paper surface is
scratched with a metallic object, de-coloring may occur.
