Operator Manual Chapter6. Receipt Printer
©
Nautilus Hyosung, Inc.
All Rights Reserved. 6-3
How to load the receipt paper
► Prior to loading the receipt paper, the following must be kept in mind.
<Note!>
▪ Load a paper roll into the unit with the shape of the roll kept intact.
(Deformed roll may cause jamming.)
▪ The leading edge of the roll shall neatly be cut prior to loading the roll.
► To load the paper roll into the printer, please follow the procedure below.
1. Open the system door with key.
2. Retract printer assembly from the rail assembly, this can be accomplished by
pressing the button and then pulling out the printer towards you.
3. Insert the paper axis into the center of receipt roll and mount it onto the charger.