Chapter3. User Handling Unit Service Manual
3-2
© 2013
Nautilus Hyosung Inc.
All Rights Reserved.
consideration that no bending/twisting forces are applied to the TFT Module from
outside. Otherwise the TFT Module may be damaged.
12. Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please
follow local ordinances or regulations for disposal.
13. Small amount of materials having no flammability grade is used in the LCD module.
The LCD module should be supplied by power complied with requirements of
Limited Power Source (IEC60950 or UL1950), or be applied exemption.
14. The LCD module is designed so that the CFL in it is supplied by Limited Current
Circuit (IEC60950 or UL1950). Do not connect the CFL in Hazardous Voltage Circuit.
15. Severe temperature condition may result in different luminance, response time and
lamp ignition voltage.
16. Continuous operating TFT-LCD display under low temperature environment may
accelerate lamp exhaustion and reduce luminance dramatically.
17. The data on this specification is applicable when LCD module is placed in
landscape position.
18. Continuous display fixed pattern may induce image sticking.
General Specifications
► General Specification of LCD
Item
Specifications
Screen Diagonal
15”
Active Area
304.128(H) x 228.096mm
Pixel H x V
1024 x3 (RGB) x 768
Pixel Pitch
0.297 x 0.297mm
Pixel Arrangement
R.G.B Vertical Stripe
Display Mode
TN, Normally White
Nominal Input Voltage VDD
+3.3Volt (Typ.)
Typical Power consumption
12.82 (64 Gray Bar Pattern, exclude inverter)
Electrical Interface
1 Channel LVDS
Surface Treatment
Anti-glare type, Hardness 3H
Support Colors
16.2M
RoHS Compliance
RoHS Compliance
