© 2012
Nautilus Hyosung Inc.
All Rights Reserved
.
A-1
Installation Manual
Appendix
Appendix
Precaution
► Prior to the operation of this ATM, make sure that all connectors are completely
connected, including communication cables, power cables and data cables inside
modules which are connected to the cash dispenser, card reader, receipt printer,
CCIM, control electronics and so on. It is likely that one or more of them became
disconnected during transport and may cause unexpected problems after
installation.
Cash & Check in Module (CCIM) in the Safety Body
Removing the Protective Material from the main body of Cash & Check In Module
▶
Bundle Section
1. Remove the tape from the Bundle Door.
2. Lift up the door and remove the Bubble Bag inside.
▶
Reject Section
Remove a tape from the Reject Section.
