Nautilus Hyosung MONiMAX 7600DA, Installation Manual

Page: 20 / 37

© 2012 Nautilus Hyosung Inc. All Rights Reserved .
3-7
Installation Manual Chapter3. Installation Information
Exterior Wall
▶
Hole in the Wall for Installation
The wall should be prepared according to the following guidelines before installing the
MX7600DA ATM.

The installation of a TTW is based on the floor from customer’s foot outside of
the building.

The maximum thickness of wall used should not exceed 237mm (9.33 inch).

After installing the TTW, the gap between the collar and wall must be waterproofed
using silicon.

The “minimum maintenance space” should be secured in the rear of the TTW.

For all of the measurements shown on the plan, ±5mm (0.2 inch) tolerance should be
kept.