Nautel XR12, Operation And Maintenance Manual

Page: 34 / 81

XR12 Operations and Maintenance Manual Operating the transmitter
Issue 3.1 2013-03-14 Page 2-9
Changing automation settings
You can control the power scheduler and the auto exciter transfer functions using the Automation
Control page. To view the
Automation Control
page, select
Automation Control
from the Main
Menu .
Figure 2.4: Automation Control page
Power Scheduler
You can enable or disable the
Power Scheduler
by selecting the
Power Scheduler
field and pressing
the
Edit
button. You can then use the
Up
or
Down
buttons to change the setting to Manual or Auto .
(If you enable the scheduler, it may take a few seconds to begin operating.)
Auto Exciter Transfer
You can enable or disable the
Auto Exciter Transfer
function by selecting the Exciter mode value and
pressing the
Edit
button. You can then use the
Up
or
Down
buttons to change the setting to Manual
or Auto .
Auto Scheduler mode
In Auto Scheduler mode, the scheduler controls which preset is active. In this mode you cannot change
the active preset (or use the Preset Control page ), and you cannot edit the parameters ( Preset Edit
page ) of any preset other than the currently active preset. The status bar indicates the preset (
A-1
through
A-6
) that is currently active. To make changes, switch to Manual mode or make changes to
the schedule.
Press the
Back
button to return to the
Main Menu
. (See “Main Menu” on page 2-6 .)
10:18 0.00kW M-1 PM:AB Man Ex:A Man
Power Scheduler: Manual
Exciter Mode: Manual
Use the arrow keys to select a value to
change. Press EDIT to make changes.
Edit Back
10:18 0.00kW M-1 PM:AB Man Ex:A Man
Power Scheduler: Manual
Exciter Mode: Manual
Use the arrow keys to select a value to
change. Press EDIT to make changes.
Edit Back