manualshive.com logo in svg

Nautel VX150, Troubleshooting Manual, Page: 72 / 182

Share
Download
Nautel VX150 Troubleshooting Manual Download Page 72

VX150 TO VX2 TROUBLESHOOTING MANUAL

RESPONDING TO ALARMS

PAGE 3.1.64

VERSION 2.0  2023-04-20

20. Secure the FET by alternate tightening the left and right M3 screws on the FET until 6 in-lbs 

(0.68 N-m) is reached.

 

Tighten the 11 M2.5 screws to 6 in-lbs (0.68 N-m).

21. Complete the PA PWB installation by reversing 

Step 2

 to 

Step 9

. Use three M3 screws (Nautel part 

# HMSP08F) from the PA Replacement kit Torque for securing E1 and the jumper. Torque all 
hardware to 6 in-lbs (0.68 N-m).

NOTE

: 

Replacement M2.5 PA screws (Nautel part # HMSP01) are provided in the NAPA40* 

Replacement Kit, if required.

 

22. Return the transmitter to operation.

CAUTION! 

When installing FET securing hardware, you can damage the FET case if 

you fully tighten one screw while the other is loose. Avoid this by alternately 
tightening the two screws.

Summary of Contents for VX150























































































































































































Reviews:

No comments