manualshive.com logo in svg

Nautel VX150, Troubleshooting Manual, Page: 62 / 182

Share
Download
Nautel VX150 Troubleshooting Manual Download Page 62

VX150 TO VX2 TROUBLESHOOTING MANUAL

RESPONDING TO ALARMS

PAGE 3.1.54

VERSION 2.0  2023-04-20

Front Panel User Interface (FPUI) Display Replacement

NOTE

: 

The USB provided with the transmitter contains videos (mp4 format) that support the 

replacement procedures in this section. Go to the USB’s 

HOME

 screen and click 

VIDEOS

. Videos for 

replacing LRUs are listed in the 

Maintenance

 section.

See MD-1or MD-2 and MD-7 in the Mechanical Drawings section of this manual.

1.

Turn RF off and disconnect ac power from the transmitter.

2.

If applicable, remove and retain the four screws securing the transmitter in the rack. 

3.

Place on a suitable workbench.

4.

Remove the PA Power Supply (U3) by pushing the panel latch to the right to unlock and slide 
power supply out. Refer to 

Analog Audio PWB Replacement - see page 3.1.40

.

5.

Remove and retain the 21 M3 screws securing the top cover. Remove cover. 

6.

From the bottom of the transmitter, remove and retain the three M3 screws. See 

Figure 3.1.24

.

Figure 3.1.24: M3 Screw Removal on bottom of Transmitter

CAUTION! 

The FPUI Display is static sensitive and must be handled in a static 

protected manner.

Summary of Contents for VX150























































































































































































Reviews:

No comments