manualshive.com logo in svg

Nautel VX150, Troubleshooting Manual, Page: 24 / 182

Share
Download
Nautel VX150 Troubleshooting Manual Download Page 24

RESPONDING TO ALARMS

VX150 TO VX2 TROUBLESHOOTING MANUAL

 PAGE 3.1.16

VERSION 2.0 2023-04-20

E12V Failure

The Exciter PWB +12V Meter measures less 
than 6 V for a period of at least 5 seconds. 

The Exciter PWB +12V Meter measures 
greater than 6 V for at least 5 seconds.

 

The most likely failure is the connection 
between the Exciter PWB and System 
Interface PWB or a component failure on 
the Exciter PWB or the System Interface 
PWB.
Check the connection between the 
Exciter PWB and System Interface PWB.
Measure the voltage at TP8 on the 
Exciter PWB and TP12 on the System 
Interface PWB.
Consider replacement of the Exciter PWB, 
System Interface PWB, or the 12V Power 
Supply. See

 

Exciter PWB Replacement 

on page 3.1.37

 

or

 

Power Supply 

(+12 V) Replacement on 
page 3.1.45

.

Exciter Booted

The Exciter firmware has loaded successfully 
and started running.
This alarm is logged but not displayed as an 
active alarm. Should appear in the logs every 
time the AC power has been applied/restored 
or after a software upgrade. 

Cleared on a power cycle or a reboot/software 
update. 

This alarm should appear in the logs 
every time the AC power has been 
applied/restored or after a software 
upgrade to indicate the Exciter firmware 
has loaded successfully and started 
running.

Alarm Name 

Trigger Conditions

Clear Conditions

Troubleshooting

Summary of Contents for VX150























































































































































































Reviews:

No comments