Nautel VS300, Operation And Maintenance Manual, Page: 145 / 229

VS300 Operations and Maintenance Manual Operating the transmitter
Page 2-130 Issue 8.0 2016-03-01
Connecting a Laptop Directly to the Transmitter
If connecting to the VS300 directly with a laptop, you must set a static IP address on the VS300 and
your laptop.
1. From the front panel UI’s
Main Menu
, go to
User Settings -> Network Settings
and set
the IP address as follows:
• DHCP: OFF
• IP Address: 10.10.10.2
• Netmask: 255.255.255.0
2. Set the transmitter for
Remote
control.
3. On the laptop, go to
Start Menu
/
Control Panel
/
Network Connections
/
Local Area
Network
.
4. In the Local Area Network Status, open the
General
tab and choose
Properties
. Scroll down
and highlight
Internet Protocol (TCP/IP)
. Choose
Properties
.
5. In the Internet Protocol (TCP/IP) Properties window, select
Use the following IP address
.
6. Enter the following settings:
• IP Address: 10.10.10.1
• Subnet Mask: 255.255.255.0
• Default Gateway: 192.168.1.2
7. In the Internet Protocol (TCP/IP) Properties window, select
OK
.
8. In the Local Area Connection Properties window, select
OK
.
9. In the Local Area Connection Status window, select
Close
.
10. Close the Network Connections window.
Note:
The following steps assume the operating system is Windows XP. Adapt as required for
computers with different operating systems.