Nautel VS300, Operation And Maintenance Manual

Page: 140 / 229

VS300 Operations and Maintenance Manual Operating the transmitter
Issue 8.0 2016-03-01 Page 2-125
Procedure to change user permissions (see Figure 2.106 on page 2-123 ):
1. Open the
User Accounts
page.
2. Select a user from the
Users
list to display the permissions for that user in the center of the
Permissions
window. The permissions associated with the selected user are identified with a
checkmark (

).
3. Press on
User Type
to reveal a drop-down menu and select a new type of user.
4. If the user type in step 3 is
Custom
, set individual permissions. Under
Permissions
, place a
checkmark (

) beside each permission that you want to associate with the user. The boxes
work like a toggle - select the checkbox to place a checkmark and select again to remove the
checkmark. Choose one or more of the following options:
5.
Activate/Modify Preset
-
Allows the user to modify presets and change the active preset.
6.
Power Control -
Allows the user to change the power set point of the transmitter..
7.
Delete Logs -
Allows the user to remove log entries.
8.
RF On/Off -
Allows the user to turn the RF output on and off..
9.
All Other Settings -
Allows the user to adjust all settings not mentioned above, except for
administrating user accounts.
10. Press
Apply
to assign the new permissions to the selected user.
Removing an Account
To remove a user account, select the desired user from the
List of Users
and click the
Delete
button.
A verification prompt will appear. Click the
OK
button to accept changes or the
Cancel
button to
discard changes and exit this menu.
To save your changes, click
Apply
.
First-Time Login
When you enter the
User Accounts
page for the first time, it is recommended you create an account
and then delete the default Nautel account, as follows:
1. Login to the AUI using the default Username (“Nautel”) and Password (blank).
2. Set up your own
Administrator
account, with your desired Username and Password.
3. Logout of the AUI, then login to your new
Administrator
account.
4. Delete the “Nautel” account.