Nautel VS300, Operation And Maintenance Manual

Page: 130 / 229

VS300 Operations and Maintenance Manual Operating the transmitter
Issue 8.0 2016-03-01 Page 2-115
Firmware Update
A firmware update is available using the front panel UI. It can also be performed from the remote
AUI, using the
Upgrade Software
page in the
System Settings
menu (see “Upgrading Software” on
page 2-102 ). Once the host (SBC) is reset, all users that were remotely connected (logged in) will be
logged out.
From the front panel UI, you can update firmware used in the transmitter. To perform a firmware
update, select
System Settings -> Firmware Update
from the
Main Menu
(see Figure 2.97 ).
Figure 2.97: System Settings - Firmware Update
LCD Settings
From the front panel, you can configure the LCD display’s contrast, brightness and backlight settings.
To view the
LCD Settings
screen, select
System Settings -> LCD Settings
from the
Main Menu
(see
Figure 2.98 ).
Figure 2.98: LCD Settings Menu
Note:
LCD Settings are only available using the front panel UI.