NX50 Operations and Maintenance Manual
Operating the transmitter
Page 2-58
Issue 3.3 2016-02-08
Preset examples - IBOC preset
The following examples shows you how to set presets for the IBOC applications with typical values:
1. Enter
Output Power
field with desired power level.
2. Set
Overall Mode
to
IBOC
.
3. Under
Digital Settings:
•
set
IBOC Service Mode
to MA-1 (Hybrid)
•
set
Enhanced Carriers
to Low
•
set
Digital Carriers
to On
•
set
Analog Bandwidth
to 5kHz
•
set
Analog Transmission
to On
Preset examples - Analog preset
1. Enter
Output Power
field with desired power level.
2. Set
Overall Mode
to Analog AM.
3. Under
Analog Settings:
•
set
AM Source
as required (typically Analog AES).
•
set
Format
as required (typically Mono L + R).
•
enter
Bandwidth
field as required.
•
set
Preemphasis
to Off (typically).
•
set
Dynamic Carrier Control
to None (typically).
Summary of Contents for NX50
