Nautel NX5, Installation Manual

Page: 57 / 70

NX5/NX3 INSTALLATION MANUAL PARTS AND TOOLS
VERSION 3.1 2021-04-22 PAGE 2.9.3
Tools for Installation
The tools you need during transmitter installation include the following:
 Digital voltmeter
 Phillips screwdrivers, sizes #1 and #2
 Pliers
 Wire cutters
 Slot screwdriver, 5 mm (3/16 inch)
 Metric and Imperial socket set up to 24 mm (15/16 inch)
 Metric and Imperial wrench set up to 25 mm (1 inch)
 Feeler gauge (to measure spark gap)
 Torque wrench (capable of up to 60 in-lbs or 6.7 N-m)
 Ratchet wrench, 3/8 inch, drive
 Appropriately sized hole punch or drill (for audio input wiring, control/monitor wiring entry and AC
power wiring entry)
 Analog audio or AES signal generator