Nautel NX5 AM, Preinstallation Manual

Page: 68 / 89

NX5 PRE-INSTALLATION MANUAL PLANNING CONTROL/MONITOR CONNECTIONS
VERSION 0.1 2015-08-01 PAGE 1.8.9
Table 1.8.3: Remote Outputs - Selection Options
REMOTE OUTPUT
NAME
DESCRIPTION LOGIC OPTIONS
Remote Enabled Indicates the local/remote control status of the transmitter.
Changes can only be made remotely if the transmitter is in
remote enabled mode. Output Low When False
Output Low When True
RF On/Off Indicates the on/off status of the transmitter’s RF power stage. Output Low When RF Off
Output Low When RF On
Active Exciter Indicates which exciter (A or B) is presently active. Output Low When A
Output Low When B
Auto Changeover
Enable/Disable Indicates the status of the auto exciter changeover function. Output Low When False
Output Low When True
Main Exciter Indicates which exciter (A or B) is selected as main. Output Low When A
Output Low When B
Scheduler On/Off Indicates the status of the mode scheduler function. Output Low When False
Output Low When True
Various Alarms Indicates the status of the selected alarm. Output Low When False
Output Low When True
AUI Watchdog Indicates the status of the AUI watchdog function. Output Low When Off
Output Low When On
Max Power Lockout 1
to 8 Indicates that the associated max power lockout limit (1 to 8) is
currently active. Output Low When False
Output Low When True
Remote Input Mimics the logic of the associated remote input selection.
Example: If Remote Output 5 is set to Remote Input, it will
mimic the logic received on remote input pin 5. This is typically
used for debugging remote inputs. Output High When Input
Active
Output Low When Input Active
Preset Status Indicates that the associated user-named preset is currently
active. Output Low When Inactive
Output Low When Active