manualshive.com logo in svg

Nautel NX5 AM, Operation & Maintenance Manual

Share
Download
Nautel NX5 AM Operation & Maintenance Manual Download Page 73

NX5 OPERATION & MAINTENANCE MANUAL

OPERATING THE TRANSMITTER

VERSION 0.1  2015-08-01

PAGE 3.2.53

Managing Meter Lists

NOTE

: Meter lists are associated with user accounts. Lists saved in this screen are only displayed in the 

current user account. Setting a list as default will define the meters that will appear when logging into 
the current account (or after an ac power interruption in the remote AUI if this is the default user 
account).

To save meter specifics for display on the 

Home

 page:

Open the 

Meter List Save

 window from the 

Home

 page using the floppy disk button (

Figure 3.2.43

).

Click 

Save As

 

to save the currently displayed meters. Enter a name in the 

Layout Name

 entry 

box and click 

OK

. 

Click 

Delete

 to discard the selected meter list.

Click 

Set Default

 to set the selected meter list as the default for the current user account. The 

* symbol shows the default.

Click 

Save 

to overwrite the selected meter list with the currently displayed meters.

Click 

Load

 to display the meters saved under the currently selected meter list in the 

Meters

 

panel on the right-hand side of the 

Home

 page.

Figure 3.2.43: Meter List Save Window

Summary of Contents for NX5 AM





























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands