Nautel NX5 AM, Operation & Maintenance Manual

Page: 69 / 220

NX5 OPERATION & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
VERSION 0.1 2015-08-01 PAGE 3.2.49
Describing the Meter Display
The meters displayed on the Home screen of the remote AUI are those selected for display. Each meter
is a colour-coded bar with minimum and maximum values (see Figure 3.2.36 on page 3.2.48 ). The
current value for a meter is indicated by an arrow on the colour-coded bar, as well as a numeric value
below the meter.
– A parameter value in the green section of a meter bar indicates the parameter is within the range for normal
operation.
– A parameter value in the yellow section (as applicable) of a meter bar indicates the parameter is still within an
operational range, but is approaching design limitations.
– A parameter value in the red section of a meter bar indicates the parameter is outside normal operating conditions.
Accessing Meter Information
Procedures for accessing and editing information in the
Meters
section of the remote AUI:
– To delete a meter from the
Home
page, click
X
in the upper, left corner of the meter to be deleted from the
Meters
window (
Figure 3.2.37
).
– To review all the meter options, click the meter list view shortcut button (magnifying glass) at the top of the meters
panel (see
Figure 3.2.37
). This will open the
Meter List View
window.
– On the
Meter List View
screen users can see all relevant meters of a sub-device. Select the sub-device in
question under the
Transmitter Layout
column and the
Relevant Meters
column will be populated. The
desired
Meters
can now be selected by clicking the checkbox to the left of the meter name.
Figure 3.2.37: Meters List View Window (Exciter A shown)
Information
X
to close/delete
Buttons
(displays full
set of meters
for specific
sub-device)
Checkboxes