Nautel NX5 AM, Operation & Maintenance Manual

Page: 38 / 220

NX5 OPERATION & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 3.2.18 VERSION 0.1 2015-08-01
Logging in to the Remote AUI
The transmitter’s remote AUI provides a means to restrict access to transmitter control functions
through the AUI to authorized users only
.
User accounts can be pre-defined to set access restriction
between view only (no control) and full-administrative control (see “User Accounts” on page 3.2.123 ) .
Access the remote AUI using a web browser as follows:
1. Configure your network settings ( “Network Setup” on page 3.2.88 ).
2. On your router or firewall software, open ports 3501 and 80 and close (restrict access to) port 22. If
you are using SNMP, open ports 161 and 162.
3. Gain remote access to the transmitter by entering the IP address in a web browser’s address field.
Your login remains active until the browser is closed.
4. When properly configured, the login menu (see Figure 3.2.8 ) appears on the web browser. Your IP
address and any login messages appear in a box at the top, beside the logo, and the current
software version number appears along the bottom of the login window.
Figure 3.2.8: Remote AUI Login Menu
IP Address: Port Number and login messages
AUI Software version
Supported languages