Nautel NX5 AM, Operation & Maintenance Manual

Page: 134 / 220

NX5 OPERATION & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 3.2.114 VERSION 0.1 2015-08-01
Precorrection Settings
You can control various critical parameter functions using the remote AUI’s Precorrection page(see
Figure 3.2.98 ), which you access from the Menu page .
NOTE:
These settings will normally be generated at the factory, based on the desired modes of
operation, and should not require user adjustment.
This section includes the following topics:
 Mag-Phase Delay, on page 3.2.115
 B+ Setpoint, on page 3.2.116
 AM-AM Correction, on page 3.2.117
 AM-PM Correction, on page 3.2.118
 Envelope Equalization, on page 3.2.119
 Configurations, on page 3.2.120
 Exciter Synchronization, on page 3.2.122
Figure 3.2.98: Precorrection Settings Page
To use this page, select an item from the list on the left-side of the page to open related information on
the right side of the page.