Nautel NX5 AM, Operation & Maintenance Manual

Page: 123 / 220

NX5 OPERATION & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
VERSION 0.1 2015-08-01 PAGE 3.2.103
Setting the Clock
The NX5 controller module’s internal clock uses an externally accessible backup battery, and therefore
maintains an accurate date and time, even during power outages. The date and time needs to be set
when the transmitter is first installed, or after a power outage if the backup battery has failed.
You can set the date and time using the remote AUI (see Setting the Clock - Using the Remote AUI ) or
using the local front panel UI (see Setting the Clock - Using the Front Panel, on page 3.2.105 ). If you
change the clock setting on the front panel UI, it will also be reflected on the remote AUI, and vice
versa. If the NTP feature is enabled (see
Enabling NTP, on page 3.2.107 ), the clock will set automatically
and cannot be manually adjusted.
Setting the Clock - Using the Remote AUI
You can remotely set the NX5’s time and date using the remote AUI’s
Time Setup
page (see
Figure 3.2.89 ) by selecting
Time Setup
from the
User Settings
options. The date and time setting is
displayed in the upper, left corner of the remote AUI.
Figure 3.2.89: Time Setup Page