Nautel NX300, Installation Manual

Page: 48 / 70

NX300 Installation Manual Installing control/monitor wiring
Page 9-2 Issue 3.0 2012-11-01
Figure 9.1: Passing Audio Input Wiring Through Ferrite Toroids
Figure 9.2: Remote Cable Entry
7. Connect the appropriate control/monitor cable(s) to the connector(s) described in Section 8
of the NX300 Pre-installation Manual .. Secure wires to the existing cabling and to the panel
using arrowhead tyraps provided in the ancillary kit (see Figure 9.3 on page 9-3 to locate
tyrap anchor hole locations).
Program Input Cable
(to exciters panel)
LXP44 & LP23
ferrite toroids
REMOTE
CABLE
ENTRY