Nautel NX15, Troubleshooting Manual

Page: 99 / 274

NX25/NX15 Troubleshooting Manual Parts Lists
Issue 5.0 2016-05-06 Page 3-3
Vendor # column
This column contains an original equipment manufacturer's part number for a part. A single part
number is listed for each part, even though there may be more than one known manufacturer. The
listed number is Nautel's usual or preferred choice. The use of this number does not restrict Nautel
from selecting and using commercial equivalents during manufacture, where their use will not
degrade circuit operation or reliability.
OEM code column
This column typically contains a five digit coded group as the original equipment manufacturer's
(OEM) identifier. The code was extracted from Cataloging Handbook H4/H8 Commercial and
Government Entity (Cage) Code. Manufacturers that were not listed in the catalog when this listing
was compiled have been assigned a unique five-letter code. This code is assigned arbitrarily and has
no other significance. The manufacturers identified for parts that have JAN or MIL part numbers are
Nautel's normal supply source for that part.
Note: OEM code 37338 is listed for parts manufactured by Nautel or to a Nautel control drawing. United States of
America customers should refer all replacement part orders to Nautel Maine Incorporated (OEM code 57655).
OEM code to manufacturer’s cross-reference
The OEM (CAGE) codes listed in the reference designation lists are representative of the original
equipment manufacturers of those parts. To determine a specific part's manufacturer contact
information, enter the five-character OEM (CAGE) code for that part in the following website:
https://www.bpn.gov/bincs/begin_search.asp
After entering the OEM (CAGE) code number, manufacturer pertinent information (address,
telephone number, fax number, etc.) will be displayed. Please contact Nautel if a part cannot be
obtained (see also “On-Line Part Quotes” in the Warranty section of this manual).
Manufacturer's index
For customers without web access, Table 3.1 on page 3-4 provides a cross-reference from the original
equipment manufacturer's (OEM) codes to the manufacturer's name. The listing is sorted
alphanumerically by the OEM code.