Nautel NX15 Operation And Maintenance Manual Download Page 121

Page: 121 / 178

NX15/NX25 Operations and Maintenance Manual

Operating the transmitter

Issue 6.0 2019-01-31

Page 2-97

Upgrade software

The

Upgrade Software

page allows for uploading software upgrade files for various

transmitter components (e.g., System Controller, AUI, etc). Navigate the page as described

below. For more detailed information, see

"Upgrading software", on page 4-1

of this manual.

Figure 2.70: System Settings - Upgrade Software

Select

Upgrade Software

from the left side of the

System Settings

page to open a related

window on the right side of the page. The page consists of the following sections and buttons:

•

Current Version

- indicates the current software version.

•

Select Upgrade File

- displays the upgrade files that are uploaded to the transmitter.

•

Details

- opens a window containing information about the installed software. If an

upgrade file is selected, the screen will show a comparison between the installed ver-

sion and the selected upgrade by component. Identical items are shown in green; differ-

ent items are shown in red. You can also view the details of the previous upgrade by

pressing the

View Last Upgrade

checkbox.

•

History

- displays a window containing a history of the upgrades to the software. Press

the + button to expand the details of the software. You can save this information to

disk as a txt file from the remote AUI.

•

Start Upgrade

- begins the process of upgrading the current software with the selected

upgrade file.

•

Manage Files (available through the remote AUI only)

- opens a window displaying the files

you can upload to upgrade the software. You can add or delete files from this list using

the

Browse

Upload

and

Delete

buttons in the window.

Press

Done

when finished to exit the window and return to the

Upgrade Software

page.

Summary of Contents for NX15



















































































































































































Search results

Summary of Contents for NX15

Reviews:

Related manuals for NX15

Brands by name

Popular brands

Nautel NX15, Operation And Maintenance Manual

Search results

Summary of Contents for NX15

Reviews:

Related manuals for NX15

Brands by name

Popular brands