Nautel NV7.5, Operation And Maintenance Manual

Page: 84 / 183

NV10/NV7.5 Operations and Maintenance Manual Operating the transmitter
Page 2-52 Issue 3.4 2016-08-03
Loading presets
When first entering the
Presets
page, the current “active” preset is displayed (see Figure 2.34 on
page 2-50 ). If the current preset is not the desired one, use the
Load
button on the left-side of
the AUI to call up a window containing a list of available presets.
Select the desired preset and press the
Load
button to view or enable editing of the preset. Press
the
Delete
button to delete the selected preset. Users cannot delete the current "active"
(operational) preset or any preset that is referenced in the
Remote I/O
menu as either a remote
input or output. Those links in the
Remote I/O
menu must be deleted before the associated
preset can be deleted. Press
Cancel
to return to the
Presets
page.
Activating presets
In the Transmitter block in the AUI’s top banner, press the bar that contains the active preset
name and the drop-down arrow (see Figure 2.35 ). The
Activate Preset
window will appear,
which contains a list of all preset options. Press and highlight the desired preset and press the
Activate
button to enable the preset as the transmitter’s active preset. Press the
Cancel
button
to close this window.
Figure 2.35: Activating Presets
CLICK HERE TO
DISPLAY PRESET
SELECTION
OPTIONS