Nautel NV30LT-N, Operation & Maintenance Manual

Page: 94 / 226

NV30LT-N OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 3.2.76 VERSION 0.1 2015-03-01
Figure 3.2.59: RDS Settings editing screens (2 of 3)
Use the up and down arrows to select a hex value between
0x0000 and 0xFFFF, then press the accept (checkmark) button
to save the change. Press the cancel (
X ) button to discard
changes and return to the previous menu. The default hex
value is 0x0000.
Use the up and down arrows to select the program type from
the various options, then press the accept (checkmark) button
to save the change. Press the cancel (
X ) button to discard
changes and return to the previous menu. The default selec-
tion is NONE.
Use the up and down arrows to select None, TA/TP, TP or TA,
then press the accept (checkmark) button to save the change.
Press the cancel (
X ) button to discard changes and return to
the previous menu. The default selection is NONE.
Use the up and down arrows to select Word or Character,
then press the accept (checkmark) button to save the change.
Press the cancel (
X ) button to discard changes and return to
the previous menu. The default selection is Word.
Enter a name. Use the right and left arrows to move the cur-
sor to the desired character. Use the up and down arrows to
edit the character, then press the accept (checkmark) button
to save the change. Press the cancel (
X ) button to discard
changes and return to the previous menu.
Use the up and down arrows to select Off, Fast or Slow, then
press the accept (checkmark) button to save the change. Press
the cancel (
X ) button to discard changes and return to the
previous menu. The default selection is Off.
Enter a name. Use the right and left arrows to move the cursor
to the desired character. Use the up and down arrows to edit
the character, then press the accept (checkmark) button to
save the change. Press the cancel (
X ) button to discard chang-
es and return to the previous menu.