Nautel NV30LT-N, Operation & Maintenance Manual

Page: 36 / 226

NV30LT-N OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
PAGE 3.2.18 VERSION 0.1 2015-03-01
Logging in to the AUI
The transmitter’s remote AUI provides a means to restrict access to transmitter control functions to
authorized users only
.
There are four different user accounts that can be pre-defined to set access
restriction between view only (no control) and full-administrative control (see “User Accounts” on
page 3.2.121 ) .
Access the AUI using a web browser as follows:
1. Configure your network settings ( “Network Setup” on page 3.2.90 ).
2. On your router or firewall software, open ports 3501 and 80 and close (restrict access to) port 22. If
you are using RDS data, open port 7005. If you are using SNMP, open port 161.
3. Gain remote access to the transmitter by entering the IP address in a web browser’s address field.
Your login remains active until the browser is closed.
4. When properly configured, the login menu (see Figure 3.2.8 ) appears on the web browser. Your IP
address and any login messages appear in a box at the top, beside the logo, and the current
software version number appears along the bottom of the login window.
If the login menu does not appear, there may be an issue related to your web browser or plug-ins.
Figure 3.2.8: AUI Login Menu
IP Address: Port Number and login messages
AUI Software version
Supported languages