Nautel NV30LT-N, Operation & Maintenance Manual

Page: 151 / 226

NV30LT-N OPERATIONS & MAINTENANCE MANUAL OPERATING THE TRANSMITTER
VERSION 0.1 2015-03-01 PAGE 3.2.133
Adjusting Display Settings
NOTE
: Front panel display settings are only available using the front panel display.
From the front panel, you can configure the LCD display’s contrast, brightness and backlight settings. To
view the
LCD Settings
screen, select
User Settings -> LCD Settings
from the
Main Menu
(see
Figure 3.2.115 ).
Figure 3.2.115: LCD Settings Menu
This menu has four sub-menu options:

LCD Contrast
- sets the display contrast.

LCD Backlight
- sets the brightness of the display’s backlight during normal use.

LED Timeout
- sets a time delay, after a period of non-use, that the brightness of the display’s
backlight will dim. This feature can also be disabled.

Menu Timeout
- sets a time delay, after a period of non-use, that the front panel screen will
revert back to the main menu.
Use the up and down buttons to move the cursor to the desired display setting and then press the right
button to enable editing of the setting.
Figure 3.2.116 on page 3.2.134 shows the editing screens for the
LCD Settings
menu. Within any of the editing screens, use the up and down buttons to edit a setting.
Press the accept (checkmark) button to save the change. Press cancel (
X
) to discard changes and return
to the previous menu.